Chemical and physical parameters

Conductivity probe for wells and water bodies.

Two electrode graphite cell.

Built-in temperature probe for thermal compensation.

35mm diameter.

Available with RS485 digital or analogue 4-20 mA output.

Cable with high resistance to hydrolysis.

Can be combined with D1-Visio portable viewer or FlexLog data logger.

The graphite conductivity cell equipped with two concentric surface electrodes, with built-in NTC temperature sensor.

The cell is protected by a perforated cylinder which allows the passage of water and easy washing of the sensor.

The probe is weighed down by a steel ballast.

The probe body is made of PVC, diameter 35 mm.

The signal conditioner is housed inside, which transforms the instrument readings into a 4-20 mA signal.

The surface connection cable is supplied in the required length.

The cable sheath, in polyethylene with high resistance to hydrolysis, makes the probe particularly suitable for prolonged use underwater.

The instrument is thermally compensated at a temperature of 20°C. The default set compensation is 2%/°C.

The output signal is a standard 4-20 mA 2-wire (current loop).